Los Alamos -  Spray Foam Attic Roof

home >> los alamos >> spray foam attic roof

Need information about Spray Foam Attic Roof in and around Los Alamos? Call us for a free quote or to ask questions about your best roofing options. 

To find out more about Spray Foam Attic Roof in the Los Alamos area, we've assembled an overview article below.  It covers anything you might want to know about spray foam roofing.

What is Spray Foam Roofing?


With a life cycle efficiency that can go beyond thirty years, SPF roofing systems provide quality that's constructed to last in Los Alamos NM. From high winds, rain, snow and hail to deterioration and foot traffic, SPF's distinct application procedure and adhesion properties assist deliver long-lasting, high-performance outcomes.

Spray Polyurethane Foam Roofing, or spray foam roofing, is a material that's sprayed as a liquid so it can broaden into a foam, developing a solid layer across an existing roof.

The typical application of spray foam is to fix and re-invigorate an existing roofing by eliminating the saturated areas, replacing with like materials, and after that spraying foam over top of the entire roof.

While SPF roofing is not the most recognized kind of roofing product, the technology has been around given that the early 1960s for industrial, commercial, and residential facilities. An SPF roofing system can be used in any environment, and when properly installed and maintained, can last over 50 years.

Spray Polyurethane Foam (SPF) for roof applications is manufactured on the job website by blending 2 extremely reactive chemicals.

The chemicals, A (polyol/resin) & B (isocyanate), are pumped from separate containers through warmed, high-pressure hose pipes to an internal mixing spray gun.

Lots of modifications have taken place in the equipment and chemistry of polyurethane roofing in the last fifty years, resulting in today's dependable roofing system applications for cool roof and other flat roof applications.

Roofing systems made with SPF can provide long-term quality, while also reducing prospective impacts to the environment through energy savings and reducing making use of land fill capacity. SPF roofs are valued for their energy effectiveness, an efficiency quality which helps decrease the ecological impact of structures. Foam roofing and insulation keeps heat and cool in check. insulation energy

Sprayed Polyurethane Foam Roofing


A spray foam roof system is a spray-in-place insulation made from rigid, closed-cell polyurethane foam (SPF). This fully adhered, self-flashing system is seamless and seals all penetrations with no joints or fasteners. SPF can be sprayed in place in a way that constructs slope to enhance drain and get rid of ponding water.

If you're asking the concern 'What is Spray Polyurethane Foam Roofing' you're most likely brand-new to commercial roofing or wanting to replace/repair your roofing system.

In any case, we can assist.

We've been installing Spray Polyurethane Foam Roofs for over 40 years. And because time, one of the most common concerns we've received from consumers is, "How does spray polyurethane foam work?"

That's why we composed this comprehensive article to cover what spray polyurethane foam is, how it's applied in roof, in addition to the advantages and drawbacks of choosing a spray polyurethane foam roof for your facility.

Spray Polyurethane Foam, more commonly referred to as SPF, is a product that's sprayed as a liquid so it can expand into a foam, producing a strong layer throughout an existing roof.

While SPF roofing is not the most known kind of roof material, the innovation has been around because the early 1960s for industrial, commercial, and residential facilities. An SPF roofing system can be used in any climate, and when properly set up and maintained, can last over 50 years.

Foam Polyurethane roof Spray


The SPF roofing system is made up of 2 liquid chemical substances called isocyanate and polyol that form the base of an adhered roof system. A protective surface area is then applied to the foam to supply an added barrier versus the components.

SPF roofing systems are referred to as "self-flashing" since when appropriately applied, the long lasting foam adheres and abides by a variety of shapes and substrates, forming a seamless, monolithic barrier.

What does that mean for the roofing system over your head? Spray Foam Attic Roof

Decreased ponding due to special roofing styles and various application densities to develop a favorable slope and improve drain.

Lowered leakage due to coverage around joints, penetrations, parapet walls, HEATING AND COOLING curves, vents and skylights.

Polyurethane foam roofs eliminate the need for counter flashing.

Foam SPF 2.8 is a small 2.8 pcf density closed cell polyurethane foam roofing system meant for usage by qualified specialists trained in the processing and application of spray polyurethane foam. SPF 2.8 offers an exceptional R-value of 6.3 per inch and a constant insulation without thermal breaks.The SPF 2.8 roofing system supplies exceptional self-adhering qualities with exceptional wind uplift, is self-flashing, seamless and with its closed cell nature supplies a resilient leak resistant roofing system. Its exceptional strength offers exceptional resistance to foot traffic and abuses. The SPF 2.8 roof can be utilized in a lot of retrofit or brand-new construction applications.

HIGH PERFORMANCE: • Efficient insulating product • Smooth air barrier • Extreme storm resistant

LEAK RESISTANT: • No mechanical fasteners • No seams • Self-flashing

Spray Foaming a Roof


Spray Foam is a closed-cell, polyurethane foam, which was established using an EPA approved 4th generation HFO blowing representative, particularly designed to offer a high performance, completely adhered roof supplying insulation and water proofing over a variety of roof deck

substrates and configurations. SPF Foam secures every part of the roofing system developing a seamless membrane hence removing the requirement for mechanical fasteners-- the number one cause of conventional roof leakages. Spray foam roofing can also be applied to vertical surfaces making the smooth coverage self-flashing.

During the last few decades foam roof has actually grown in appeal and end up being the flat and low slope roofing material of choice for ecologically conscious consumers.

Closed Cell Spray Foam Roofing


The Spray Polyurethane Foam (SPF) used in roof applications is "closed cell". Simply put, it is a plastic with millions of small closed cells which are impenetrable by water. A block of SPF submerged under water will remain buoyant and dry indefinitely. For this reason, spray polyurethane foam is used in flotation docks and the hulls of sea vessels. SPF is not a sponge.

Sprayed Polyurethane Foam, also known in the roof industry as SPF, has actually been used as a roof material for over 50 years. Sprayed Polyurethane Foam is applied as a liquid using plural-component spray equipment. The sprayed-on SPF liquid broadens approximately 25 times its initial volume to form a hard, closed cell, monolithic insulation and roofing surface. Find out more

The Polyurethane Foam remedies or dries within seconds after being applied to the roofing surface area. Its expansion leads to a weather tight roofing membrane that is fully stuck to the roof substrate. A protective elastomer-- either urethane or silicone - top coat is then applied over the foam. This protective top coat can be sprayed on, or used with hand or power rollers.

CLOSED CELL FOAM:

Is stiff and dense

Has a greater R-value than Open-Cell; providing an R-6 per inch

Supplies strength to the structure it is applied to

Is more pricey to produce and need to be used in thinner, more accurate "passes" (which increases the cost of setup).

Function as an air AND moisture barrier.

Spray Foam Roofing Contractors


We earned this title due to the fact that we provide good service and take care of our consumers, however also due to the fact that we love spray foam roofs. We genuinely think it's a remarkable roof that can assist building owners sleep better in the evening.

Spray Polyurethane Foam is the very best roof product in the world, we believe that wholeheartedly. Let's take a look at what makes spray foam so fantastic, and why our company believe in it a lot.

Sprayed Polyurethane Foam can be set up rapidly, does not require tearing off your old roof system, and supplies the best insulation properties of any roofing system once set up. On top of all this, because it does not have any fasteners or joints, both leakages and repairs of a SPF roof are very rare.

Spray foam is a fantastic suitable for both brand-new building and retrofit applications. In brand-new building, some sort of roofing deck-- often metal-- need to initially be set up prior to the foam can be applied. In retrofit, or re-roof, applications, the foam can be applied directly to the existing roof in many cases. Both applications are a fantastic fit for spray foam thanks to its unmatched flexibility.

What is Spray Foam Roofing

Sprayed Polyurethane Foam has actually become one of the most outstanding roofing products on the marketplace. Its ease of setup and lifelong efficiency make it a genuinely innovative product.

Engineered to be the Best:.

• Seamless and completely self-adhering.

• Requires no fasteners, getting rid of thermal bridging.

• Complies with irregular shapes and broadens to fill fractures.

• Offers a water resistant monolithic smooth roofing system.

• Endures the most severe weather.

• Greater resistance to wind uplift and hail damage.

• Highest R-values on the market.

• Functions as a heat, wetness and air barrier.

• Decreases energy expenses.

Two-Part System

Spray Foam


The foam we install is a HFC-blown, No Ozone-Depleting, spray polyurethane foam (SPF). The system is ideal for commercial structures, particularly large structures with irregular shapes or complex layouts. Polyurethane foam is a monolithic insulation formed by blending an ISO element with a resin blend. Spray Foam Attic Roof At the time of setup, the products are heated up and pumped through specifically metered, plural component devices and blended directly on the roof as they are sprayed out of the weapon.

Protective Coatings.

The most significant hazard to SPF is UV exposure. SPF must be safeguarded from the sun after setup to prevent sped up deterioration. SPF can be protected from the sun with a renewable finish, normally in the form of silicone, acrylic, or urethane. The protective finishing is spray-applied directly over top of the foam, where it provides UV defense, additional waterproofing, and increased protection from the elements. To further increase the security the coating supplies, structure owners typically elect to have roofing granules set To even more increase the protection the covering provides, building owners frequently elect to have roofing granules set in the wet finish for extra sturdiness and defense from the aspects, or to designate sidewalks.

We have actually grown by concentrating on resolving our consumers' issuessuch as roof repairs. Our innovative solutions to challenging jobs have saved our clients valuable money and time. Further, our customer service extends beyond the average work day; we have dedicated customer service personnel who are available 24 hours a day, a fact our clients truly value.

We are a family-owned and ran roofing company who originated from a simple start. We understand the distinct struggles that face a little company. However, we have also dealt with huge jobs and have discovered what these large companies and big jobs require. This makes us a valuable resource for very large clients also. From our modest start, we have now end up being the largest spray foam roofer in the nation. While we provide other roof solutions, spray foam is our core, it is what we do best, therefore it stays our focus. As a result, our abilities and capabilities with spray foam are unequaled in the roofing market. •.

Spray Polyurethane foam spf roofing


Our spray foam roofing system is a spray-in-place insulation made from stiff, closed-cell polyurethane foam (SPF). This fully adhered, self-flashing system is smooth and seals all penetrations without any joints or fasteners. SPF can be sprayed in place in such a way that develops slope to boost drain and eliminate ponding water.

SPF-based roof systems are built by blending and spraying a two-component liquid that forms the base of an adhered roof system. SPF can be set up in different thicknesses to offer slope to drain pipes or meet a defined thermal resistance (R-value). A protective appearing is then applied to the foam to offer defense from the aspects.

The first component of an SPF-based roofing system is rigid, closed cell, spray polyurethane foam insulation. The foam is composed of two parts: isocyanate and polyol. Transfer pumps are utilized to get the components to a proportioning unit that effectively meters the two at a one to one ratio and warms and pumps them through double pipes. The parts are mixed at the spray gun, which is utilized to apply them to a substrate.

The 2nd part, the protective surfacing, typically is a spray used elastomeric covering, though hand and power rollers can be utilized. The protective emerging also can be a membrane, such as a fleece backed thermoset single ply membrane. The function of the surfacing is to offer weatherproofing, protect the foam from UV exposure, offer defense from mechanical damage and help with the fireproof quality of the roofing system.

The generic types of finishes utilized on SPF-based roof systems include:.

Acrylic.
Butyl Rubber.
Hypalon ™.
Silicone.
Fragrant Polyurethane Elastomer.
Aliphatic Polyurethane Elastomer.
Customized Polyurethane Elastomer.

Mineral granules or sand might be broadcast into a coating to offer increased surface toughness and aesthetic value.

The chemicals used to produce polyurethane foam compounds are made or blended to perform in various temperature level ranges. Makers of spray polyurethane foam based roofing systems use materials in various reaction profiles. Profile modification is produced by changing the chemical components, usually with a catalyst, to make up for ambient temperature level modifications. Conditions such as wind speed, sunlight, surface area wetness, humidity and temperature level of the substrate can impact the response of the polyurethane foam.

Spray polyurethane foam-based (SPF) roofing systems


SPF-based roofing system systems are built by blending and spraying a two-component liquid that forms the base of an adhered roof system. SPF can be installed in numerous densities to provide slope to drain pipes or meet a specified thermal resistance (R-value). A protective emerging is then applied to the foam to supply security from the elements.

The very first part of an SPF-based roofing system is stiff, closed cell, spray polyurethane foam insulation. The foam is composed of 2 components: isocyanate and polyol. Transfer pumps are used to get the components to a proportioning system that properly meters the two at a one to one ratio and warms and pumps them through dual tubes. The elements are blended at the spray gun, which is used to apply them to a substrate.

The second component, the protective appearing, typically is a spray applied elastomeric finishing, though hand and power rollers can be used. The protective surfacing also can be a membrane, such as a fleece backed thermoset single ply membrane. The function of the surfacing is to provide weatherproofing, protect the foam from UV direct exposure, offer defense from mechanical damage and help with the fireproof characteristic of the roofing system.

Polyurethane foam spray roof


Spray polyurethane foam (SPF) is extensively recognized as a highly efficient building envelope material, with roofing systems being among 2 core application classifications (the second being building envelope insulation for walls, ceilings and floors). A high-performance item with numerous exceptional benefits, spray foam has actually acquired market show wide adoption by home builders and roofing contractors. Like numerous building items, correct installation ought to constantly be carried out by an expert installer using appropriate handling and setup strategies, with security preventative measures used and followed.

In roofing systems, the foam serves dual functions as a protective roof product and as a thermal insulation service.

A roofing's primary purpose is to protect what is beneath it. SPF roofing systems provide resilient security for the structure below. Spray foam is light-weight, as many SPF roof systems weigh less than a pound per square foot when installed. SPF is also smooth and self-flashing, and extremely resistant to adverse weather, wind uplift and foot traffic. Once installed, it requires very little maintenance, offering increased strength to the roofing system. It performs well throughout all geographical areas and environments.

SPF also offers excellent abilities as both an air and water barrier. Not just does it protect versus water and moisture intrusion, however it also lowers air movement through the roofing system, improving indoor air quality and reducing the energy use of the structure.

Since the roof of any structure is frequently a major source of heat loss, the insulating qualities of the SPF provide outstanding indoor temperature control and energy performance. As a thermal insulator, the foam has one of the greatest R-values per inch of all roofing insulations; due to the fact that spray foam is completely adhered, there are no thermal shunts from fasteners. Keeping warmth in the structure throughout colder months and heat out in hotter months, the foam minimizes heating and cooling needs, reducing energy costs for the life of the product, which independent research studies mention at approximately 50 years or more with appropriate maintenance. In hot climates, reflective roofing system coverings might likewise be applied over the SPF to even more reduce cooling costs.

Roofing system performance is not measured by one aspect alone (such as R-value). Rather, the success of the roofing system is correctly evaluated by reviewing combined factors to consider for air movement, wetness control, health, security, toughness, occupant comfort and energy performance-- with SPF scoring high marks in each category.

Spray Foam Roof Coating


Our roof coating systems provide an easy-to-apply solution to safeguard your SPF roof from damage and degeneration. Conserve money on a full tear-off with strong, flexible SEBS and Silicone roofing system coverings from Inland Coatings-- and ensure your roofing system can hold up against severe weather conditions for several years to come.

Required an economical, energy-saving option to secure your SPF roof? You're in the right place. Our coatings assist extend your roofing system's service life by safeguarding it from the aspects and avoiding damage that can eventually compromise your commercial structure. Here are 5 reasons to choose Inland Coatings to reinforce your SPF roof:.

Versatile Roofing System Coatings.

With an elongation of over 500% and tensile strength that can endure 1,500 psi, our roofing finishes are a few of the strongest, most versatile options on the market.

Dependable Security Against Leaks & Wetness.

Our SEBS finishings provide the resilience you need to protect your SPF roofing system's longevity, together with the versatility to secure it from the leaks and deterioration that frequently come with frequent growth and contraction. Silicone services for commercial structure roofs provide long-lasting leak protection.

Energy-Efficient Cool Roofing Systems


The SPF products we use safeguard Spray Polyurethane Foam roof substrates from foam loss, provide outstanding durability, and conserve structure owners on energy costs. Our ENERGY STAR-rated white covering supplies a reflective surface to keep the roofing system cool and secure the surface area from UV radiation damage. It's best for warmer environments. Silicone roofing services for commercial buildings also offer exceptional solar reflectivity.

Customized Colors to Fit Your Needs.

Beyond our standard white coating, our RC-2000 coating is available in 11 extra color options-- or we can provide customized colors to match your brand or building. Silicone roof is available in standard colors.

Proven Experience.

With 40 years of experience and exclusive chemistry in all of our items, is the relied on name for foam roof repair systems. In addition to residential work, we are a commercial roof contractor.  We are your first choice for roofing contractor in Albuquerque, Rio Rancho, Los Lunas and Santa Fe. 

We also do sprayed foam insulation as we are foam insulation specialists as well. We understand spray foam as both insulation contractors and Los Alamos spray foam specialists.
 


Previous|Next


Los Alamos is a town in Los Alamos County, New Mexico, United States, that is recognized as the development and creation place of the atomic bomb—the primary objective of the Manhattan Project by Los Alamos National Laboratory during World War II. Things to do in Los Alamos.

Los Alamos NMLos Alamos NM map